Search Your Models Here
  • HP DeskJet 2131 Driver Installation
  • HP DeskJet 2131 Ink Cartridges Installation
  • HP DeskJet 2131 Built-in Printer Driver
  • HP DeskJet 2131 Estimated Ink Levels
  • HP DeskJet 2131 Unboxing Process
  • HP DeskJet 2131 Printer Troubleshooting
  • HP DeskJet 2131 Airprint Setup
  • HP DeskJet 2131 ePrint Setup
  • Printing and Scanning Process of HP DeskJet 2131

123 HP DeskJet 2131 Ink Cartridges Install

HP DeskJet 2131 Ink Cartridges Install

Use the genuine HP Ink cartridges and achieve better quality printing with high saturation. With the HP Instant Ink, you can simplify the replacement process where you prepay for certain number of pages. Here, we gave instructions to simplify the HP DeskJet 2131 Ink Cartridges working process.

Estimated Ink Levels for HP Deskjet 2131

You can easily determine the ink level with the estimated ink report. On the Other hand, it gives an estimate of remaining ink in the cartridge. To get estimated ink levels:

  1. First, open the printer software then click estimated ink levels. Avoid using refilled or remanufactured cartridges as it might deliver incorrect or unreliable message.
  2. Low-ink warning message or indicator helps with the HP DeskJet 2131 Ink cartridge replacement process. After receiving the low-ink message, replace the ink cartridge and avoid the printing delays.

HP Ink Cartridge Ordering Process

  1. Check the printer device and locate the cartridge number and order for the cartridge and toner supplies.
  2. Open the Printer Software on your printer device and then click shop for supplies online. To get genuine ink cartridges, visit and select the country/region, use the on-screen instructions to select the product.


HP DeskJet 2131 Ink Cartridges Replacement Process

  1. HP recommends you to use the original HP ink cartridges to achieve better print quality. HP ink cartridges are developed and qualified by the manufacturer’s that delivers better result.
  2. To start the replacement process, turn ON printer device and load a stack of paper into the input tray.
  3. Open the cartridge access door and wait until the carriage move to the center of the access door.
  4. Press down the cartridge and pull it out of the slot. To insert ink cartridge, take out the cartridge from the packing and gently take off the plastic tape.
  5. Slide in the ink cartridge and wait until it gets snaps into its place. After inserting the cartridges, close the ink access door.
  6. Following the cartridge Installation, the device prompts you to carryout the cartridge alignment process.
  7. Use the on-screen instructions and complete the cartridge alignment. With the cartridge alignment, you can achieve high quality output.

Single-Cartridge Mode

  1. With the Single-cartridge mode, HP printer device can be operated with a single cartridge. The printer device can share and copy the documents.
  2. Switch your printer device to the single-cartridge mode and check with the cartridge status. If the printer device is still at two-cartridge mode, check the cartridge package and remove the protective tape.

HP DeskJet 2131 Ink Cartridges - Troubleshooting Instructions

  1. Clogged printhead might affect the printing quality. Use the automated tool and clear the printhead of the printer device.
  2. To start with, load enough paper into the input tray and then choose setup in the printer’s control panel.
  3. Then, click Add a printer icon and it opens the Windows Printer Wizard. Click next and then open the printer device.
  4. The setup menu displays you a list of printer related options, select clean print head under the printer maintenance menu.
  5. You can determine the printer’s quality with this test page. If the output isn’t up to the expected level, click clean again and repeat the cleaning process.

Page Smears

  1. To fix the ink smear issue. First, load a stack of paper into the input tray and choose setup from the printer’s control panel.
  2. Then, choose printer maintenance from the setup menu and then select clean page smears.
  3. Then, click Add a printer icon and it opens the Windows Printer Wizard. Click next and then open the printer device.
  4. Immediately, your printer device automatically prints out a test page. Use this test page and review the printer quality.
  5. If the issue is still not resolved continue the troubleshooting process and fix the HP DeskJet 2131 Ink Cartridges problem.

Print Settings

  1. The Print Settings of your device determines the printing quality, use these instructions and check the device’s settings.
  2. First, open the software application that is being used to send the printing request. Choose print from the file menu.
  3. Use the Properties Dialog box and set the basic settings like paper type, paper quality, paper size and color.
  4. Finally, click OK to save the preferred settings. Try to print, if the issue is still not resolved continue the troubleshooting process.
ePrinter Setup Quick Tags